VINYL GENERAL INSTRUCTIONS

Rice Paper | Coated Paper | Foil | Mylar | Vinyl | Kraft | Non-Woven

MAINTENANCE
PAPER-BACKED VINYL MAY BE CLEANED BY WASHING WITH SPONGE OR CLOTHS USING DETERGENT.

DO NOT USE ABRASIVES.

IT SHOULD NOT BE EXPOSED TO CHEMICALS.

INSTALLATION INSTRUCTIONS
Wall should be clean and dry with a relatively smooth surface.

ALL NEW UNSEALED CONSTRUCTION should be primed for wall covering.

For best results use a high quality pre-mixed vinyl adhesive.
Paste and book each roll, allowing an extra 3-5minutes for the paste and moisture to be evenly absorbed.

Seams should be trimmed approximately 3/4”. Trimming will minimize the effect of paneling inherent in hand painted designs. (Panels have no match or join lines)

Use brush for smoothing and be sure to roll seams.
Excess paste may be wiped from the surface of the paper unless it is specified as “unsealed”.

Try to keep wallpaper face as paste free as possible, as it will oxidize over time.

 


home | about | press | contact/showrooms | faqs | wallcoverings | fabrics | contract products

All yangki products available through the trade only. Please contact your designer or architect.

709 Kentucky Street  Vallejo  California 94590    Tel: 415 322 0709    © yangki 2011    All rights reserved.